Banner Portal
Pulp chamber temperature changes during resin composite photoactivation
Remote

Keywords

Resin composites. Photo-activation. Pulp chamber. Temperature rise. Dental materials

How to Cite

1.
Schneider LFJ, Cavalcante LMA, Tango RN, Consani S, Sinhoreti MAC, Correr Sobrinho L. Pulp chamber temperature changes during resin composite photoactivation. Braz. J. Oral Sci. [Internet]. 2015 Nov. 17 [cited 2024 Feb. 24];4(12):685-8. Available from: https://periodicos.sbu.unicamp.br/ojs/index.php/bjos/article/view/8641798

Abstract

The aim of the present study was to verify if there is any difference in the pulp chamber temperature rise during the photo-activation of two resin composites with different viscosities. Eighteen extracted bovine incisors were divided into two groups (n=9) that were restored with two different resin composites – Filtek Z250 and Filtek Flow (3M/ESPE Dental Products, St Paul, MN 55144, USA). During the photo-activation, with a conventional halogen light curing unit (XL 2500, 3M/ESPE), a type-K thermocouple registered the temperature rise peak in the pulp chamber. The temperature rise data were submitted to Student-t test at 5% significance. The resin composite Filtek Flow shows statically higher mean temperature rise (p<0.05). We conclude that the resin composites with different viscosities produce different temperature changes during the photo-activation.
https://doi.org/10.20396/bjos.v4i12.8641798
Remote

References

Peutzfeldt A. Resin composites in dentistry: the monomer systems. Eur J Oral Sci 1997; 105: 97-116.

Moszner N, Salz. New developments of polymeric dental composites. Prog Polym Sci. 2001; 26: 535-76.

Anusavice KJ. Phillip’s Science of Dental Materials. 10th ed. Philadelphia (PI): Saunders; 1998.

Ferracane JL. Current trends in dental composites. Crit Rev Oral Biol Med 1995; 6: 302-18.

Guggenberger R, Weinmann W. Exploring beyond methacrylates. Am J Dent 2000; 13: 82-4.

Knezevic A, Tarle Z, Meniga A, Sutalo J, Pichler G, Ristic M. Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes. J Oral Rehabil 2001; 28: 586-91.

Rueggeberg F. Contemporary issues in photocuring. Compend Contin Educ Dent Suppl 1999; 20: S4-15.

Uhl A, Mills RW, Jandt KD. Polymerization and light-induced heat of dental composites cured with LED and halogen technology. Biomaterials 2003; 24: 1809-20.

Lloyd CH, Brown EA. The heats of a reaction and temperature rises associated with the setting of bonding resins. J Oral Rehabil 1984; 11: 319-24.

McCabe JF. Cure performance of light-activated-composites by differential thermal analysis (DTA). Dent Mater 1985; 1: 231-4.

Goodis HE, White JM, Andrews J, Watanabe LG. Measurement of temperature generated by visible-light-cure lamps in an in vitro mode. Dent Mater 1989; 5: 230-4.

Hansen EK, Asmussen E. Correlation between depth of cure and temperature rise of a light-activated resin. Scand J Dent Res 1993; 101: 176-9.

Smail SRJ, Patterson CJW, McLundie AC, Strang R. In vitro temperature rises during visible-light curing of a lining material and a posterior composite. J Oral Rehabil 1988; 15: 361-6.

Porko C, Hietala EL. Pulpal temperature change with visible light-curing. Oper Dent 2001; 26: 181-5.

Lisanti VF, Zander HA. Thermal injury to normal dog teeth: in vivo measurements to pulp temperature increases and their effect on the pulp tissue. J Dent Res 1952; 31: 548-58.

Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol 1965; 19: 515-30.

McCabe JF, Wilson HJ. The use of differential scanning calorimetry for the evaluation of dental materials. J Oral Rehabil 1980; 7: 235-43.

Shortall AC, Harrington E. Temperature rise during polymerization of light-activated resin composites. J Oral Rehabil 1988; 25: 908-13.

Brown WS, Dewey WA, Jacobs MR. Thermal properties of teeth. J Dent Res 1970; 49: 752-5.

White SM, Fagan MC, Goodis HE. Intrapulpar temperatures during pulse Nd: YAG laser treatment of dentin, in vitro. J Periodontol. 1994; 65: 255-9.

Thompson MN, Gomez HF, Puckett AD. Pulpal temperature changes after exposure to a light curing source [abstract 524]. J Dent Res 1997; 76: 79.

Arikawa H, Fujii K, Kanie T, Inoue K. Light transmittance characteristics of light-cured composite resins. Dent Mater 1998; 14: 405-11.

Tanoue N, Koishi Y, Matsumara H, Atsuta M. Curing depth of different shades of a photoactivated prosthetic composite material. J Oral Rehabil 2001; 28: 618-23.

Masutami S, Setcos JC, Schinell RJ, Phillips RW. Temperature rise during polymerization of visible light-activated composite resins. Dent Mater 1988; 4: 174-8.

Harrington E, Wilson HJ, Shortall AC. Light activated restorative materials: a method of determining effective radiation times. J Oral Rehabil 1996; 23: 210-8.

Asmussen E. Factors affecting the quantity of remaining double bonds in restorative resin polymers. Scand J Dent Res 1982; 90: 490-6.

Lloyd CH, Joshi A, Mcglynn E. Temperature rises produced by light sources and composites during curing. Dent Mater 1986; 2: 170-4.

Loney RW, Price RBT. Temperature transmission of high-output light-curing units through dentin. Oper Dent 2001; 26: 516-20.

Baldissara P, Catapano S, Scotti R. Clinical and histological evaluation of thermal injury thresholds in human teeth: a preliminary study. J Oral Rehabil 1997; 24: 791-801.

The Brazilian Journal of Oral Sciences uses the Creative Commons license (CC), thus preserving the integrity of the articles in an open access environment.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...