Resumo
The use of Surface Mounted Technology (SMT) and the miniaturization of the electronics equipment are demanding new lead-free materials in the soldering process, due to its high toxicity to human being and environmental concerns. Global competitiveness has been driving industries to technological development as challenges to the manufactures and there is an effort to use alternative materials for the soldering electronic components to find an environment-friendly process. This paper presents a literature review involving soldering processes and describes the lead toxicity from related residue. The main solder alloy that is nowadays used to substitute tin-lead and European Directives are also presented.
Referências
ANDERSON, I. E.; WALLESER, J.; HARRINGA, J. L. Observations of nucleation catalysis effects
during solidification of SnAgCu solder joints. JOM, p. 38-43, July 2007.
EPA. Locating and estimating air emissions from sources of lead and compounds. In: EPA-454/R-98-006, index of / ttnchie1/efdocs/, Lead 1. USA: U.S Environmental Protection Agency, 1998.
GRIFFIN, T. B., KNELSON, J. H. Lead, environmental quality and safety. New York: George
Thieme Publishers, Stuttgart Academic Press, 1975, v. 2, p20-76.
GRIGOLETTO, E. M. Tensile and isothermal fatigue properties of a Copper joint with Sn63-Pb37, Sn62-Pb36-Ag2 and Sn42-Bi58 Alloys. 2003. 147 p. PhD Thesis - School of Mechanical Engineering, University of Campinas, Campinas, 2003.
GOODMAN, L. S.; GILMAN, A. G.; GILMAN, A. As bases farmacológicas da terapêutica. Rio de Janeiro: Guanabara Koogan S.A., 1983. v. 2. 1414 p.
HWANG. J. S. Solder paste for electronics packaging. S.l.: VNR, 1989. Cap. 5-6.
HWANG, J. S. Implementing lead-free electronics. New York: McGraw-Hill, 2004.
LUND, H. F. Industrial pollution control handbook. New York: McGraw-Hill, 1971. Cap. 14.1, 14.19, 25.39.
MAESTRELLI, L.; GRIGOLETTO, E. M. Lead free implementation – A case study correlating the thermal profile and laboratory analysis. In: IPC PRINTED CIRCUITS EXPO, APEX and THE DESIGNERS SUMMIT, 2006, USA. CD-ROM… USA, 2006.
MAESTRELLI. L. M.; PFAHL , P. Technology for environmentally preferred products. In: INTERNATIONAL TECHNICAL SYMPOSIUM ON PACKAGING, ASSEMBLING AND TESTING EXIHITION, 2001, Brazil, CD-ROM… Brazil, 2001.
MEESEMAECKER, P.; ROZUMEK, W.; TARRIEU, R. Introduction of surface mounted device technology. Electrical Communication, v. 63, n.2, p. 122-129, 1989.
OGA, S. Fundamentos de toxicologia. São Paulo: Atheneu, 1996. p. 160-164, 444-449.
VELARDEZ, M. R. S.; GRIGOLETTO, E. M. Processo de soldagem em SMT, acompanhamento na indústria. In: P.D. 16. TE. MAT. 0001A/RT-01-AA. Brasília: Telebrás AS – CPqD, 1990, p 1-23.
A Labor e Engenho utiliza a licença do Creative Commons (CC), preservando assim, a integridade dos artigos em ambiente de acesso aberto.
Downloads
