Banner Portal
Vol. 9 No. 3 (2018): Process technology and building systems

Vol. 9 No. 3 (2018)

Published September 28, 2018
Process technology and building systems
Thematic edition

Editorial

Luciana Alves de Oliveira, Sidney Piochi Bernardini, Daniel de Carvalho Moreira
164-166
Process technology and building systems
https://doi.org/10.20396/parc.v9i3.8653494
PDF (Português (Brasil))
DOI: https://doi.org/10.20396/parc.v9i3.8653494

Articles

Tales Lobosco, Débora Carvalho Câmara
167-178
Developing qualitative models for structural learning
https://doi.org/10.20396/parc.v9i3.8650263
PDF (Português (Brasil))
DOI: https://doi.org/10.20396/parc.v9i3.8650263
Lucia Teresinha Peixe Maziero
179-191
Teaching topography in the architecture and urbanism course by active learning
https://doi.org/10.20396/parc.v9i3.8651722
PDF (Português (Brasil))
DOI: https://doi.org/10.20396/parc.v9i3.8651722

Review paper

Pedro Henrique Pinto Bezerra, Adriana de Paula Lacerda Santos, Sergio Scheer
192-203
BIM in the planning process of projects with prefabricated panel systems: an alternative to social housing construction
https://doi.org/10.20396/parc.v9i3.8650218
PDF (Português (Brasil))
DOI: https://doi.org/10.20396/parc.v9i3.8650218
Fernanda Almeida Machado, Regina Coeli Ruschel
204-222
Solutions integrating BIM and Internet of Things in building life cycle: a critical review
https://doi.org/10.20396/parc.v9i3.8650216
PDF (Português (Brasil)) PDF
DOI: https://doi.org/10.20396/parc.v9i3.8650216

Communications

Raimundo Fagner Freitas Kochem, Silvana De Nardin
223-233
Composite slim floor: elements and construction process
https://doi.org/10.20396/parc.v9i3.8650817
PDF (Português (Brasil))
DOI: https://doi.org/10.20396/parc.v9i3.8650817
Wallison Angelim Medeiros, Guilherme Aris Parsekian
234-245
Infill shear walls in precast concrete frames
https://doi.org/10.20396/parc.v9i3.8650860
PDF (Português (Brasil))
DOI: https://doi.org/10.20396/parc.v9i3.8650860
Alex Roda Maciel, Fabiano Rogerio Corrêa, Mércia Bottura de Barros
246-258
Towards a BIM-based digital interface in cut and bent rebar design-fabrication
https://doi.org/10.20396/parc.v9i3.8650863
PDF (Português (Brasil))
DOI: https://doi.org/10.20396/parc.v9i3.8650863